FREE SHIPPING with every order! Shop Now
Published On: Thu, Jan 7th, 2021

Project NSX: Chasing Perfection vs. When To Stop

Share This

Project NSX: Chasing Perfection vs. When To Stop

<br /> Project NSX: Chasing Perfection vs. When To Stop – Speedhunters

Project NSX: Chasing Perfection vs. When To Stop

It’s tradition to open an SH Garage update story with an apology about how long it has been since the last one, which either means we’re all terrible time managers or these project cars are more trouble than we’d like to admit.

I squeezed in an update about the ABS upgrade to Project NSX in July, but there was still unfinished business from November 2019, where we ended the dyno tune at Chequered Tuning on a cliffhanger – the stock injectors were running out of steam at the top of the rev range, meaning the car had been cruising around Melbourne with a temporarily lowered rev limit for almost 12 months.

The Never-Ending Project

Let me rephrase… There was the occasional cruise around Melbourne, but Project NSX has been racking up fewer kilometres than ever before thanks to COVID and a severe (but ultimately successful) lockdown in my home state. At least there was less guilt about leaving the car in pieces while I tinkered with a few new electronics projects.


One of the most fundamental changes made to Project NSX has been the installation of a standalone ECU. Switching from the standard Honda computer to a Haltech Elite 2500 was akin to a brain transplant where the surgeon throws in a bunch of Terminator T-800 spec enhancements at the same time. Somewhat embarrassingly the new brain had just been ‘floating’ behind the driver’s seat, held in place by a combination of the Boomslang harness and an interior panel clipped over the top. This seemed like a problem to solve with my new best friend – the 3D printer.


The compact waterproof casing of the Elite 2500 has a much smaller footprint than the original ECU, so if I wanted to use the original mounting points on the firewall interior I’d need a bracket. With a pair of digital calipers and Fusion360 loaded up, I had a ‘copy’ of the factory ECU mounts tweaked to attach a carbon fibre sheet.


You can see how it compares to the stock ECU’s aluminium chassis here. I used three of the four available mounting points.

A few different angles comparing dimensions.

There was plenty of space remaining to mount the external wide-band controller unit and CAN Hub expansion module. I shortened and re-pinned the wiring to remove the excess length in the new configuration. The fit was perfect, and now it’s hidden back behind an interior panel to never be seen again. At least I feel better about doing the job properly.


With workshops starting to reopen as Melbourne maintained its ‘Donut’ status – zero new COVID community cases – it was time to book in to see tuner Trent Hewitson, and install the new RDX injectors. The car would be undriveable until being tuned, so I left this as late as possible to minimise downtime.


The RDX injector is a popular upgrade in the Honda world, but it was not a foregone conclusion for Project NSX. Fuel is one half of the combustion reaction and the way it is delivered is very important to outcomes of efficiency (and power) – especially in naturally aspirated engines. I needed an injector which would supply more fuel and ideally do a better job of atomising it to assist flame propagation (burning more of the fuel in a more stable manner). Considering the injector position and manifold would not be changing, other geometric variations needed to be minimised. Finding information about an injector’s delta angle and cone angle is not always easy, but it is necessary to ensure you are not installing something that physically fits but ends up drenching the port walls instead of hitting its target – the intake valve port.


The RDX injector nailed the brief, perhaps an indicator of Honda’s intake manifold geometry remaining fairly similar over the 20-odd years between the C-series and K-series engines. As an added bonus, the RDX injector features a split cone spray pattern, better targeting the two intake valves compared to the single-cone original.


Old on top, new on bottom. The blue RDX injectors require a top hat extension and spacer to fit the stock NSX fuel rail and manifold. I had the stock injector seats slightly drilled to ensure a proper seal and ideal injector placement, for those considering this upgrade, the ‘OLDMNSX’ RDX Injector Fitment Improvement kit comes highly recommended.

I struggled to find an off-the-shelf adaptor for the standard plug (Honda OBD1) to RDX (‘Toyota-style’) so purchased the parts individually and made them up.


It was at this point I was starting to realise how little standardisation exists in automotive wiring. Plug, terminal and crimp style varies greatly, and there is no clear guide to determine what works with what, nor what crimping tool is required. Respect to the real wiring professionals out there!


With all the hard work done, the six injectors were installed. I may eventually delete these adaptor harnesses and just re-pin the factory harness, but I wanted to have the new setup proven before making the modification even harder to reverse.


The RDX injectors are high-impedance (saturated) design favoured by modern OEM’s due to enhanced reliability at the cost of requiring a more sophisticated tune. At these flow rates (410cc), there’s no expected downside to high impedance as the Haltech has the capability to control either style. I removed the resistor box and installed a bypass plug.


The fuel filter banjo bolt was also modified to accept a pressure sensor to provide an extra point of reference for Trent’s tune of the Haltech.


I’d now also be able to keep an eye on pressures from inside the car thanks to another electronics upgrade – installing the GaugeArt 2.4-inch display in the old ashtray location. This is just a test fit; as you can see, the 3D-printed fascia was not perfect, so I’ll be redesigning it for a V2 in the coming weeks. The GaugeArt connects directly to the Haltech CAN Hub (meaning it is literally plug-and-play) and can display a ton of different parameters on customisable pages.


Getting a bit more confident with my wiring abilities I decided the best way to allow me to tab through pages on the display without removing my hands from the wheel would be to mount some buttons to it. The ‘carbon fibre’ mount panel and customised buttons were both from AliExpress and cost me less than a pub lunch.


Any cabling that runs to something that rotates is bound to be a pain in the ass since the wiring will need to wrap around the central point (steering column in this case). My first solution was a length of  rally-style ‘curly cable’, but it wanted to jam into this gap between the plastic trim and SRS airbag harness. Cutting the trim was looking like the only option before I realised the solution was literally staring me in the face.


OEMs solved the wheel button problem with the ‘clockspring’, a cassette which holds a wrapped coil of wires in a way which allows them to rotate with the wheel. Since the cruise control buttons of the stock wheel are long gone I was able to hijack the factory clockspring to connect my GaugeArt button. Success!


My bargain button was even customised by the diligent AliExpress seller to illuminate in a colour matching the stock NSX gauges at my request, and will glow whenever a user-determined max value is exceeded on the GaugeArt, so it effectively operates as a catch-all idiot light for fuel pressure drops, max oil temps and so on. Admittedly it’s not super bright so I’m unsure how effective it is in the heat of battle. The right button is currently unused, but the plan is to eventually restore cruise control functionality.

Tuning By Trent


Anyway, I’d finished messing around with electronics and it was off to Chequered Tuning to see Trent. The workshop is extremely discreet (who needs signage when your reputation speaks this loudly), but a couple of big-power Japanese rides are always a giveaway.


Trent got straight into it, kindly refraining to comment about the state of the interior when I’d brought the car in. Before he started the injector retune he set up the fuel pressure sensor and upgraded the Haltech software to the latest version which would enable a few extra goodies. He also programmed in a few extra safeguards (prompts to pull ignition timing) to protect the engine at my request.


The major downside to choosing an OEM injector over something from the aftermarket is the lack of data available. I was able to scrounge together some third party reports on the RDX injector before my visit, but it wasn’t required; Trent had already tuned plenty of cars running the RDX units and had his own calibrations. I let the man work his magic and retreated from the sound-deadened dyno room as he started to ramp up the RPM for some power pulls.


We were rewarded with some solid results indicating consistently higher torque at any RPM (ranging from an 8-12Nm increase) and a corresponding bump in power. Some particular points of interest: A torque dip around 3,000rpm was smoothed out (fantastic for street driving) and power was better sustained during the VVIS opening from 4,600-4,900rpm. Off VTEC power gain was consistent but low – less than 5hp – but once the high cam kicked in the gains jumped to a peak increase of 8.2kW (11hp). It’s worth noting this peak figure is referencing the ‘safe’ tune Trent dialled in last time due to the maxed-out stock injectors, and compared to the highest output from a lean run in 2019 the gain was about 4kW (5.4hp) at the hubs.


As we were finishing up in the Chequered Tuning dyno room, Trent posed a big question: “So… what’s next?” Obviously it would be nice to squeeze more kilowatts from the engine, but I’ve picked most of the low-hanging fruit growing on the tree of power.

Most of the well-designed stock intake system is still in place on Project NSX, but it’s a possible bottleneck for flow at high RPM. The throttle body measures a meagre 64mm internal diameter, so that might be the best place to start. US-based NSX tuner Carl Hernandez has recently seen MAP data logs on a similarly-specced C30A which suggest a restriction in either the intake manifold or air box at high RPM.


The extra 5hp we found up top with the injectors and tune have contributed to a milestone – the ‘Stage One’ goal I set of surpassing the power-to-weight ratio of the BMW E46 M3 has been achieved. I’d like to take this opportunity to thank God (Sochiro Honda), and my close support network (credit cards and Australia Post) for getting us this far. I won’t celebrate too hard – the Stage Two target of the 987.2 Cayman S is within striking distance, so it’s time to get back into the workshop!

Back On Track

After a long and hardcore lockdown here in Melbourne, track days were finally back on the menu. Fellow Honda-nut Rhys and myself booked into the first available track day at Winton to blow out the cobwebs. There were no real intentions of setting PBs, but I was keen to see how the new ABS and uncorked engine would perform. This was followed up with a cheeky session out at Bryant Park Hillclimb as part of Nugget Nationals (which deserves a story in its own right), at which local snapper Martin Keep captured us in action.


The C30A is pulling strongly, and as in-car footage shows I could rely on the mid-range torque to pull me out of corners as opposed to using lower gears to keep the engine in VTEC. The latter might ultimately be faster, but would require more rapid-fire downshifting which frankly I need more practice to balance with brake modulation.


The upgraded ABS was the real revelation, however. Clearly the old accumulator-based system wasn’t in tip-top shape, but even if it were it would be embarrassingly slow-witted and clumsy compared to the updated electronically-controlled pump. Dare I say it, this might be my favourite modification to Project NSX yet. It’s so rare that a modification has absolutely no negative trade-off for the increased performance.


Future improvements? The GaugeArt screen made me aware of some relatively high temperatures for both coolant (110°C/230°F) and intake air temp (65°C/149°F), nothing worth pulling into pit lane for, but performance and peace-of-mind would certainly be enhanced by bringing those down a little. I’d also like to add oil pressure and temperature sensors to keep an eye on those. Otherwise the car is driving like a dream and I’m almost starting to think I should slow down the mods, lest I accidentally let the magic out. We’ll see how long that lasts…

Blake Jones
Instagram: blaketjones

Additional Photos by Martin Keep
Instagram: @martinkeep



Team Speedhunters

Editorial Director:
Brad Lord
Commercial Director:
Ben Chandler
Creative Director:
Mark Riccioni
Contributing Editor:
Dino Dalle Carbonare
Technical Editor:
Ryan Stewart
Concept Artist:
Khyzyl Saleem
Will Beaumont, Keiron Berndt, Jordan Butters, Ron Celestine, Mario Christou, Cian Donnellan, Matthew Everingham, Blake Jones, Stefan Kotze, Vladimir Ljadov, Paddy McGrath, Sara Ryan, Trevor Yale Ryan, Dave Thomas, Simon Woolley, Naveed Yousufzai

Published at Thu, 07 Jan 2021 02:30:16 +0000

FREE SHIPPING with every order! Shop Now

About the Author


Leave a comment

XHTML: You can use these html tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Powered by WP Robot

Project NSX: Chasing Perfection vs. When To Stop